symphony v140 official firmware

symphony v140 sp flash tool error dead boot repair factory signed firmware 100% working

symphony v140 sp flash tool error fix problem done

symphony v140 customer care firmware

symphony v140 repair factory signed firmware



symphony v140 hw2 cm2 format after dead / boot repair done


Flash Stock Rom using Smart Phone Flash Tool (SP Flash Tool)
Requirements: Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
Step 1: Download and install Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.
Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).
Step 3: Download the Stock Rom that you want to Flash on your Android Smartphone and extract it on your Computer.
Step 4: Download and Extract Smart Phone Flash Tool on Your Computer
Step 5: Now Open SP Flashtool (you will find this from the extracted files in Step#4).
Step 6: Once Smart Phone Flash Tool is launched, Click on the Download Tab.
Step 7: In the Download Tab, now click on the scatter-loading button.
Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock rom folder).
Step 9: Now, Click on the Download Button to begin the Flashing Process.
Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detect your smartphone.
Step 11: Once Flashing is completed, a Green Ring will appear.
Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, Now your Android Smartphone is successfully flashing the Stock Rom you have Downloaded.